Solvent Distillers DIstatic serie

The units of the DIstatic serie, with capacity of 7 - 12 - 25 - 60 - 120 - 180 litres are distillers which allow the recycling and the re-use of degreasing and washing solvents. Through a simple distillation process, they separate the contaminants (resins, polymers, pigments, paints, oils, etc.) from the original solvent.
The boiling of the solvent is accomplished by a peripheral heating jacket filled with diathermic oil, heated by an electrical element. The vapours are then convoyed to a condenser cooled by air or water. The condensed solvent is collected in a tank, for its reuse. The contaminants remain as a residue inside a disposable bag named "Rec-Bag" ; in case of liquid residue, by tilting the unit itself. The distilled solvent characteristics are not altered by the distillation process, which can be carried on repeatedly.The DIstatic serie can be connected to a vacuum unit, suitable for high boiling solvents or for those flammable ones which have a close boiling point and flash point. The vacuum module can be equipped with an air operated vacuum pump or an electrical vacuum according to the need.
 
Impianto da 12 litri Impianto da 25 litri Impianto da 60-120 litri
Distillatore per Solventi modello D12 A
 

 

Distillatore per Solventi modello D25 A
 

 

Distillatore per Solventi modello D60 A
Model Loading capacity (litres) Processing time (hours) Protection
Flammable solvents
Not flammable solvents
Dimensions (cm)
Weight (kg)
S7 A 7 2.30 - 3.30 AD-T IP44 * 50 x 50 x h130 40
S12 A 12 3.30 - 4.30 AD-T IP44 * 55 x 65 x h165 54
S25 A 25 3.30 - 4.30 AD-T IP44 * 65 x 100 x h150 110
S60 A 60 3.30 - 4.30 AD-T IP44 * 90 x 122 x h161 262
S120 A 120 3.30 - 4.30 AD-T IP44 * 105 x 152 x h195 464
D12 A 12 3.30 - 4.30 EEx od llB 655 x 65 x h165 67
D25 A 25 3.30 - 4.30 EEx od llB 65 x 100 x h150 142
D60 A 60 3.30 - 4.30 EEx od llB 90 x 122 x h161 306
D120 A 120 3.30 - 4.30 EEx od llB 105 x 152 x h195 522
D180 A 180 3.30 - 4.30 EEx od llB 180 x 180 x h220 834
230/400 Volt - 50/60 Hz - Built according norms CEE 89/392 - 91/368 - CEI 64-2 - EN 50 014/015/018

* In the Countries where it is allowed by the existing norms and respecting the particular conditions of installation and use
FORMECO reserves itself the right to bring modifications without advising

Go back to Solvent Recovery Systems