Solvent Distillers DYnamic serie


The units of the series DYstatic 30 - 60 - 120 litres are distillers which allow the recycling and the reuse of degreasing and washing solvents.

Through a simple distillation process, they separate the contaminants (resins, polymers, pigments, paints, oils, etc.) from the original solvent.

The boiling of the solvent is accomplished by a peripheral heating jacket filled with diathermic oil, heated by an electrical element.

The vapours are then conveyed to a condenser cooled by air or water. The condensed solvent is collected in a tank, for its reuse. A rotating scraper having adjustable metallic blades keeps the content to be treated constantly in movement allowing maximum extraction of solvent while avoiding the residues to stick to the boiler’s wall and bottom.

An automatic drying cycle will allow the residues to be extracted in solid or powder state.

The DYstatic serie can be connected to a vacuum unit, suitable for high boiling solvents or for those flammable ones which have a boiling point close to the flash point. The vacuum module can be equipped with an air operated vacuum pump or an electrical vacuum according at wish.




Loading capacity (litres)
time (hours)
Dryness cycle time (adjustable)
Flammable solvents
Not flammable solvents
Dimensions (cm)
Weight (kg)
SQ60 A 60 3.30 - 4.30 da 0 a 5 ore AD-T IP44 * 90x122xh161 313
SQ120 A 120 3.30 - 4.30 da 0 a 5 ore AD-T IP44 * 105x152xh195 580
DQ30 A 30 3.30 - 4.30 da 0 a 5 ore EEx od llB 65x100xh150 190
DQ60 A 60 3.30 - 4.30 da 0 a 5 ore EEx od llB * 90x122xh161 470
DQ120 A 120 3.30 - 4.30 da 0 a 5 ore EEx od llB * 105x150xh195 630
230/400 Volts - 50/60 Hz 
* In the Countries where it is allowed by the existing norms and respecting the particular conditions of installation and use
FORMECO reserves itself the right to bring modifications without advising
Go back to Solvent Recovery Systems